Mmc: 754 Vm Halt - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 754
3 3
DCS
Used to take the Cadence or SVMi-4 card off-line. This MMC ensures that there are no calls on
the card when it is taken off-line. You cannot halt the card using MMC 810 (Halt Processing).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 754
Display shows
2. Dial 1 to halt (HALT) or 0 not to halt (PROC)
OR
Press UP or DOWN key to select
Press RIGHT soft key
3. Press UP or DOWN key to select YES or NO
(YES will take the card off-line)
Press RIGHT soft key
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
VM HALT
(Cadence & SVMi-4)
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
None
Cadence programming
SVMi-4 programming
MMC 754 [DCS / Compact II] (Page 1 of 1)
3 3 7 7 408i
816
DISPLAY
VM HALT
STATUS: PROC
VM HALT
STATUS: HALT
VM HALT
ARE YOU SURE?YES
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408