Mmc: 710 Lcr Digit Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 710
3 3
DCS
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call place-
ment. This table works in conjunction with LCR ROUTE TABLE, LCR TIME TABLE and LCR MOD-
IFY DIGITS TABLE. Maximum number of entries is:
DCS & Compact II
Digit string length is 10 numerical digits. This system automatically maintains entered digit strings
in numerical order. The characters Q and # are also accepted for use with feature codes.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 710
Display shows
2. Dial LCR entry (see above) (e.g., 005)
OR
Press UP or DOWN to select entry and press RIGHT
soft key to move cursor
3. Enter LCR digit string via the dial keypad and press
RIGHT soft key
OR
Press LEFT soft key to return to step 1
4. Enter digit length (00–31)
Cursor will move to RT (route selection)
Enter RT (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
LCR DIGIT TABLE
3 3
CI CII
816
500 300
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Depends on software version
MMC 210 Customer On/Off
MMC 400 Customer On/Off Per Trunk
MMC 711 LCR Time Table
MMC 712 LCR Route Table
MMC 713 LCR Modify Digit Table
MMC 710 (Page 1 of 1)
3 3 3 3
816 408i
408 & 408i
100
DISPLAY
LCR DIGIT (001)
DIGIT:
LCR DIGIT (005)
DIGIT: _
LCR DIGIT (005)
DIGIT:305426
LCR DIGIT (005)
LENGTH:10 RT:01
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408