Mmc: 424 S0 Mapping - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 424
3 3
DCS
Generates a table by which an ISDN terminal number is mapped onto a BRI STATION port.
For a detailed description and other MMC-related procedures, refer to BRI Related MMC Proce-
dure in the S Overview section of this manual (see Part 3, "Special Applications").
0
Note: For each BRI access, two adjacent ports are assigned. You need only map a number onto one of the
two ports. You can map only one port to each number. This means you can't use the same number in more
than one BRI access. However, more than one number can be mapped onto a port and used in a BRI ac-
cess.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 424
Display shows
2. Dial an ISDN terminal number (e.g. 7803)
OR
Press UP or DOWN key to select the number and
press RIGHT soft key to move cursor
3. Dial an ISDN station number (e.g. 703)
OR
Press UP or DOWN key to select the number and
press RIGHT soft key
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
S MAPPING
0
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
NONE
MMC 419 BRI Option
MMC 423 S/T Mode
MMC 424 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[7801]S0 MAPPING
NONE
[7803]S0 MAPPING
NONE
[7803]S0 MAPPING
703
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408