Pre-Run Machine Inspection; Starting Machine; Emergency Stop Procedures - Windsor Chariot iScrub CSX24 Operating Instructions Manual

Operations
Machine Operation

Pre-Run Machine Inspection

Do a pre-run inspection to find possible problems that
could cause poor performance or lost time from break-
down. Follow the same procedure each time to avoid
missing steps.
NOTE: See maintenance section for pre-run machine
inspection checklist items.

Starting Machine

NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all safety devices are in place and operating
properly.
1. The operator should be on the pedal platform. The
throttle pedal must be in the neutral position.
2. Turn the machine power on by turning key switch
clockwise to the "ON" position.
3. Check the position of the Directional Control
Switch to make sure the machine will travel in the
direction intended.
4. Press the Drive Reset Directional Control Switch to
reset and set the intended direction for travel.
5. Press lightly on the throttle pedal with right foot
20

Emergency Stop Procedures

1. Push in emergency stop button. This will also
engage the parking brake and cause the machine
to stop immediately.
86317500 CHARIOT SCRUBBER