Projector Checking; Slide Jam (All Models) - Kodak EKTAPRO 4020 Service Manual

SM 5576-1

6. Projector Checking

1
. Power on the Projector. If there is no function and no initialization procedure, check the primary and the
secondary Fuse F1 and F2.

Slide jam (all models)

2
. To avoid slide jams check the position of the DRIVE RING. Use FIXTURE TOOL TL 622 0454 to adjust
the TRAYMOTION PCB how it is described in Modification Instruction No.1
Take care of the spring located at the rear side of the Metal Slide (see figure 6-1). The spring must be
KODAK AG, Stuttgart
NOTE
outside of the Slide Gate.
figure 6-1
6-1
Service Manual
01/97