Table of Contents
Advertisement
Registration
Expand your mi 6861 system by adding accessory handsets. Bring telephone
access to rooms where a phone jack isn't available!
Your mi 6861 can operate up to four handsets. To order additional handsets (model mi
6820) go to www.vtechphones.com or call VTech Customer Service at 1-800-595-9511.
In Canada contact VTech Telecommunications Canada Ltd. at www.vtechcanada.com or
1-800-267-7377.
To register your mi 6820 accessory handsets:
1. After charging the battery, the screen will display:
2. Press SEL, you will see ENTER BASE ID, if the
screen already says ENTER BASE ID, go to step 3.
3. Enter the 15 digit base unit ID code, located on the
underside of your mi 6820. If you make a mistake,
press the DELETE key to backspace (delete cha-
racters), then enter the correct information.
4. Press SEL to complete the registration process.
5. Once a valid base ID code has been entered, the
display will blank for a second or two, and then
show:
6. If the base accepts the new handset, after several
seconds the new handset will show:
where X is the new handset number assigned,se-
quentially, by the base.
If you do not enter the correct digit sequence, you will hear an error tone. Press DELETE
key to backspace to erase a character(s) and carefully re-enter the base ID code.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
including0 through 9 and *. Make sure you enter all 15 digits.
9
Advertisement
Table of Contents
