Registration
Re-register an Existing Handset(s) to
New Base
1. Install the new mi 6861 base unit, the
handset(s) will display SEARCHING, press
and hold the SEL button for two seconds.
2. The handset will display:
3. Follow steps 3 through 6 in Registration, on
page 9.
Re-Registering a New Handset(s) to an
Existing Base
De-register all system handsets by:
1. Unplug the base power plug.
2. Press and hold the PAGE key.
3. Plug the base unit power plug back in and
continue to hold down the PAGE key for 10
seconds.
4. This will erase all handsets registered to the
base. The handsets will now prompt you to:
5. Re-register the handset(s) to the base by fol-
lowing steps 3 through 6 in Registration, on
page 9.
10