Setup
Connecting Power to Base Unit
CAUTION: Use only the VTech power supply provided with your telephone.
Plug the power adapter into an electrical outlet, and the connector into the bottom of the
base unit.
Installation of Battery
To telephone outlet
1. Remove battery compartment cover by
pressing on the indentation and sliding
downward.
2. Align the two holes in the plug with the
socket pins, then snap the plug into place.
Place the battery in the compartment with
the wires in the upper right corner.
3. Replace the battery cover by sliding it
upwards.
4. If the new battery is not already charged,
place the handset in its base unit and
allow it to charge for 10-12 hours. Be
sure to place the handset in its base when
not in use to insure maximum daily per-
formance.
6
To outlet