Table of Contents
Advertisement
Setup
Charging of the Handset Battery
The handset of your cordless telephone is powered by
rechargeable battery. It charges automatically whenever
the handset is in base unit.
You should charge the battery for 10-12 hours when
you first receive your phone. You will know the battery
needs charging when:
•
The low battery message is displayed:
•
The handset seems completely dead, the LCD is completely clear and does not
activate when you press the keys.
IMPORTANT:
1
If the phone will not be used for a long period of time, remove the batteries to prevent
possible leakage.
2. Do not dispose of batteries in a fire, they might explode.
3. Do not open or mutilate the batteries. Toxic substances may be released, causing
harm to eyes or skin.
4. Exercise care in handling batteries in order to prevent an accidental short of the
charge contacts, potentially causing the batteries to overheat.
5. Do not dispose of these batteries into household garbage, they should be properly
recycled.
6. Do not charge the batteries with other electrical devices.
Connecting to Phone Line
Plug one end of the telephone line cord into the jack at the bottom of the base unit. Then
plug the other end of the cord into the wall jack. Please see the illustration on page 6.
Checking for Dial Tone
After the batteries are charged, press PHONE on the handset. PHONE will appear on the
handset display, and you will hear a dial tone. If not, see In Case of Difficulty.
IMPORTANT! FOR MAXIMUM PERFOR-
MANCE OF YOUR CORDLESS TELEPHONE
SYSTEM:
1. Choose a central location for your base
unit.
2. Install your base unit and extension hand-
sets away from electronic equipment, such
as personal computers, television sets and
microwave ovens.
3. In locations where there are multiple
cordless telephones, separate the base
units as far away as possible.
4. Install your telephone equipment away
from heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme
cold.
7
Advertisement
Table of Contents
