Table of Contents
Advertisement
Advanced settings
Registration
When an additional handset is first powered up or the handset has been de-
registered, Register! will display on the screen prompting you to register the
handset. Follow these steps to register a handset:
• Locate the handset beside the telephone base.
• Press FIND HANDSET on the telephone base for about 15 seconds.
• Press MENU/SEL to enter menu.
• Press
# ## to activate the registration menu.
** *
• Press MENU/SEL to select Registration.
• Press MENU/SEL to select Register.
• Use the dial pad to enter PIN (factory preset PIN: 0000), and press MENU/
SEL to confirm, Searching is displayed on screen.
• Registered should display on the screen and you will hear a confirmation
tone (if the Key beeps setting is on).
Searching
Registered
www.vtechphones.com
Register!
• If the telephone
If the telephone
base cannot
detect the
handset, or a
wrong PIN is
Registration
entered, No base
will be displayed.
Keep the handset
close to the
telephone base
Register
and repeat the
Deregister
above steps to
register again.
• If a handset is
not registered,
it cannot make
*
or receive calls
or access the
call log. All other
menus and
features can still
be used.
21
Advertisement
Table of Contents
