Web: Viewing And Configuring Stacking - HP PROCURVE 2610 Advanced Traffic Management Manual

ProCurve Stack Management
Configuring Stack Management
When using stacking in a multiple-VLAN environment, the following criteria
applies:
■
■
■

Web: Viewing and Configuring Stacking

Figure 8-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
switches.
To view or configure stacking on the web browser interface:
1. Click on the Configuration tab.
2. Click on Stacking to display the stacking configuration for an individual
3. Click on Apply Changes to save any configuration changes for the individ­
4. If the switch is a Commander, use the Stack Closeup and Stack Management
To access the web-based Help provided for the switch, click on
browser screen.
8-46
Stacking uses only the primary VLAN on each switch in a stack.
The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
switch, and make any configuration changes you want for that switch.
ual switch.
buttons for viewing and using stack features.
in the web
[?]