C
ontinuous forms jammed in printer
Do not carry out any operations inside the printer with the Power
Switch set to On.
1.
Set the Power Switch to OFF.
2.
Tear off any unprinted continuous forms.
3.
Raise each Pin Tractor cover (1) and remove the continuous forms
from the Pin Tractors.
4.
Rotate the Platen Knob and remove the forms from the front or
rear of the printer.
5.
If a form fragment remains inside the printer, place two or three
forms in a stack on the Pin Tractors and turn the Platen Knob to
push the fragment out of the printer.
6.
Set the Power Switch to ON.
Warning!
1
Troubleshooting > 46