Setting Menu Values; Confirming Current Settings - Oki ML6300FB User Manual

Setting menu values

The following information explains the printer settings and
how you can change them. Printer items and their values are
printed for reference.

Confirming current settings

To print the current menu settings, use a cut sheet of letter-
size paper or continuous forms of width at least 254 mm. In
this example, a sheet of paper is used.
1.
Set the Paper Type lever to cut sheet mode.
2.
Carry out one of the following:
(a)
(b)
3.
Place the cut sheet on the Paper Tray. The cut sheet is
taken into the printer automatically and the printer
prompts you to request a menu settings print.
4.
Press the PARK button and the printer prints out all the
menu items currently selected and their corresponding
settings.
5.
Exit or proceed to change menu settings:
(a)
(b)
If the printer power is OFF, while holding down the
SEL button set the printer Power Switch to ON.
If the printer power is ON, press the SHIFT and SEL
buttons together.
To exit menu settings confirmation, save the
current settings and eject the paper, press the
SHIFT and SEL buttons together.
To change menu settings, see "Menu Settings" on
the next page.
Operating instructions > 32