When To Reboot/Shutdown; Action; Configuration; Apply / Cancel - Cisco VPN 3000 User Manual

14
Administration

Action

Click a radio button to select the desired action. You can select only one action.
Reboot
loads and verifies the software image, executes system diagnostics, and initializes the system. A
reboot takes about 60-75 seconds. (This is the default selection.)
Shutdown without automatic reboot
halt so you can turn off the power. Shutdown terminates all sessions and prevents new user sessions
(but not administrator sessions). While the system is in a shutdown state, the System LED (Model
3005) or the blue usage LEDs (Models 3015–3080) blink on the front panel.
Cancel a scheduled reboot/shutdown
or for sessions to terminate. (This is the default selection if a reboot or shutdown is pending.)

Configuration

Click a radio button to select the configuration file handling at reboot. These selections apply to reboot
only. You can select only one option.
Save the active configuration at time of reboot
reboot using that new file.
Reboot without saving the active configuration
saving the active configuration. (This is the default selection.)
Reboot with Factory/Default configuration
as if it had no CONFIG file. You will need to go through all the Quick Configuration steps described
in the VPN Concentrator Getting Started manual, including setting the system date and time and
supplying an IP address for the Ethernet 1 (Private) interface, using the system console. This option
does not destroy any existing CONFIG file, and it does not reset Administrator parameter settings.

When to Reboot/Shutdown

Click a radio button to select when to reboot or shutdown. You can select only one option.
Now
Delayed by [NN] minutes
system time. Enter the desired number in the field; the default is 10 minutes. (FYI: 1440 minutes =
24 hours.)
At time [HH:MM]
the desired time in the field. Use 24-hour notation and enter numbers in all positions. The default is
10 minutes after the current system time.
Wait for sessions to terminate (don't allow new sessions)
session terminates, and don't allow any new sessions in the meantime. If you (the administrator) are
the last session, you must log out for the system to reboot or shutdown.

Apply / Cancel

To take action with the selected options, click Apply . The Manager returns to the main Administration
screen if you don't reboot or shutdown now.
14-18
= Reboot the VPN Concentrator. Rebooting terminates all sessions, resets the hardware,
= Reboot or shutdown as soon as you click Apply . (This is the default selection.)
= Reboot or shutdown NN minutes from when you click Apply , based on
= Reboot or shutdown at the specified system time, based on a 24-hour clock. Enter
= Shut down the VPN Concentrator; that is, bring the system to a
= Cancel a reboot or shutdown that is waiting for a certain time
= Save the active configuration to the CONFIG file, and
= Reboot using the existing CONFIG file and without
= Reboot using all the factory defaults; i.e., start the system
= Reboot or shutdown as soon as the last
VPN 3000 Concentrator Series User Guide