Add Sa To Rule On Filter:; Ipsec Sas; Apply - Cisco VPN 3000 User Manual

Add SA to Rule on Filter:

The Manager shows the name of filter to which you are adding a rule that has an Apply IPSec action
configured. You cannot change this name here. See Configuration | Policy Management | Traffic Management
| Filters | Modify

IPSec SAs

The IPSec SAs list shows the configured SAs that are available; i.e., all the SAs in the active
configuration.

Apply

To add an SA to the rule, select the SA from the list and click Apply . The Manager returns to the
Configuration | Policy Management | Traffic Management | Assign Rules to Filter
configuring, modifies the active configuration, and updates the Current Rules in Filter list to show the rule
with its SA.
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
Configuration | Policy Management | Traffic Management |
Assign Rules to Filter | Change SA on Rule
This screen lets you change the configured Security Association that is applied to a rule that has an Apply
IPSec
On this screen, you change which SA is applied. You configure SAs themselves on the Configuration |
Policy Management | Traffic Management | Security Associations
Note:
The change takes effect as soon as you click Apply . If this filter is being used by an interface or group,
the change may affect tunnel traffic.
VPN 3000 Concentrator Series User Guide
Configuration | Policy Management | Traffic Management | Assign Rules to Filter | Change SA on Rule
.
action configured. You can assign only one SA to a rule.
screen for the filter you are
screens.
13-37