Administration | Access Rights; Apply / Cancel; Administration | Access Rights | Administrators - Cisco VPN 3000 User Manual

Apply / Cancel

To save your settings in the active configuration, click Apply . The Manager goes to the main
Administration
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel . The Manager goes to the main Administration screen.

Administration | Access Rights

This section of the Manager lets you configure and control administrative access to the VPN
Concentrator.
• Administrators : configure administrator usernames, passwords, and rights.
• Access Control List : configure IP addresses for workstations with access rights.
• Access Settings : set administrative session timeout and limits.
Figure 14-21: Administration | Access Rights screen

Administration | Access Rights | Administrators

Administrators are special users who can access and change the configuration, administration, and
monitoring functions on the VPN Concentrator. Only administrators can use the VPN Concentrator
Manager.
Cisco provides five predefined administrators:
• 1 - admin = System administrator with access to, and rights to change, all areas. This is the only
administrator enabled by default; i.e., this is the only administrator who can log in to, and use, the
VPN Concentrator Manager as supplied by Cisco.
• 2 - config = Configuration administrator with all rights except SNMP access.
• 3 - isp = Internet service provider administrator with limited general configuration rights.
• 4 - mis = Management information systems administrator with the same rights as config .
• 5 - user = User administrator with rights only to view system statistics.
This section of the Manager lets you change administrator properties and rights. Any changes take effect
as soon as you click Apply .
VPN 3000 Concentrator Series User Guide
screen.
Administration | Access Rights
14-21