List Name; Network List - Cisco VPN 3000 User Manual

Figure 7-8: Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or
Remote Network List screen

List Name

The Manager supplies a default name that identifies the list as a LAN-to-LAN local or remote list, which
we recommend you keep. Otherwise, enter a unique name for this network list. Maximum 48 characters,
case-sensitive. Spaces are allowed.
If you use the Generate Local List feature on the Local Network List screen, edit this name after the system
generates the network list.

Network List

Enter the networks in this network list. Enter each network on a single line using the format n.n.n.n/
w.w.w.w
Note: Enter a wildcard mask, which is the reverse of a subnet mask. A wildcard mask has 1s in bit positions to
ignore, 0s in bit positions to match. For example, 10.10.1.0/0.0.0.255 = all 10.10.1.nnn
addresses.
If you omit the wildcard mask, the Manager supplies the default wildcard mask for the class of the
network address. For example, 192.168.12.0 is a Class C address, and default wildcard mask is
0.0.0.255
You can enter a maximum of 200 networks in a single network list.
VPN 3000 Concentrator Series User Guide
Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or Remote Network List
, where n.n.n.n is a network IP address and w.w.w.w is a wildcard mask.
.
7-17