Copy Filter; Delete Filter; Configuration | Policy Management | Traffic Management | Filters | Add, Modify, Or Copy - Cisco VPN 3000 User Manual

Copy Filter

To create a new filter by copying the basic parameters and rules from a filter that has been configured,
click Copy Filter . The Manager opens the Configuration | Policy Management | Traffic Management | Filters |
Copy

Delete Filter

To delete a configured filter, select the filter from the list and click Delete Filter . See notes below. The
Manager refreshes the screen and shows the remaining entries in the Filter List .
Notes: You cannot delete a filter that has been applied to an interface. If you try to do so, the Manager displays
an error message.
You can delete a filter that has been applied to a group or user, and there is no confirmation or undo.
Doing so may affect their use of the VPN.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
Configuration | Policy Management | Traffic Management |
Filters | Add, Modify, or Copy
These screens let you:
You configure the rules in a filter on the Configuration | Policy Management | Traffic Management | Assign
Rules to Filter
Note: On the Modify screen, any changes take effect as soon as you click Apply . If this filter is being used by an
interface or group, changes may affect data traffic.
VPN 3000 Concentrator Series User Guide

Configuration | Policy Management | Traffic Management | Filters | Add, Modify, or Copy

screen.
Add : Configure the basic parameters for a new filter and add it to the list.
Modify : Modify the basic parameters for a configured filter.
: Create a new filter that is a copy of a configured filter, and configure its basic parameters. The
Copy
copy also includes all the rules and SAs of the original filter except rules with an Apply IPSec action.
screen.
13-31