Configuration | System | Events | Trap Destinations | Add Or Modify; Destination; Snmp Version; Community - Cisco VPN 3000 User Manual

Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.
Configuration | System | Events | Trap Destinations |
Add or Modify
These screens let you:
Figure 10-7: Configuration | System | Events | Trap Destinations | Add or Modify screen

Destination

Enter the IP address or hostname of the SNMP network management system that is a destination for
event trap messages. (If you have configured a DNS server, you can enter a hostname; otherwise enter
an IP address.)

SNMP Version

Click the drop-down menu button and select the SNMP protocol version to use when formatting traps to
this destination. Choices are SNMPv1 (version 1; the default) and SNMPv2 (version 2).

Community

Enter the community string to use in identifying traps from the VPN Concentrator to this destination.
The community string is like a password: it validates messages between the VPN Concentrator and this
NMS destination. If you leave this field blank, the default community string is public .
VPN 3000 Concentrator Series User Guide
Add an SNMP destination system for event trap messages.
a configured SNMP destination system for event trap messages.
Modify

Configuration | System | Events | Trap Destinations | Add or Modify

10-15