Filter Name; Default Action - Cisco VPN 3000 User Manual

13
Policy Management
Figure 13-14: Configuration | Policy Management | Traffic Management | Filters | Add, Modify, or
Copy screen

Filter Name

Enter a unique name for this filter. Maximum is 48 characters.

Default Action

Click the drop-down menu button and select the action that this filter takes if a data packet does not
match any of the rules on this filter. The choices are:
Drop
Forward
Drop and Log
Configuration | System | Events
Forward and Log
event class). See note below.
Note: The Log actions are intended for use only while debugging filter activity. Since they generate and log an
event for every matched packet, they consume significant system resources and may seriously degrade
performance.
13-32
= Discard the packet (the default selection).
= Allow the packet to pass.
= Discard the packet and log a filter debugging event ( FILTERDBG event class). See
and see note below.
= Allow the packet to pass and log a filter debugging event ( FILTERDBG
VPN 3000 Concentrator Series User Guide