Cisco 7962G User Manual page 56

With the authentication methods that require a password, use the << softkey to backspace and correct
the password.
When the power is lost or reset under some circumstances, the stored credentials are cleared.
To establish the VPN connection, press the Submit softkey.
To disable the VPN login process, press the Cancel softkey.
If you want to...
Check the security level of a call or
conference
Verify that the phone connection
(call status) is secure
Determine if secure calls can be
made in your company
There are interactions, restrictions, and limitations that affect how security features work on your
phone. For more information, ask your system administrator.
A device engaged in a call is either trusted or untrusted as determined by Cisco. Lock or shield
Note
icons are not displayed on a Cisco Unified IP Phone screen when a call is to or from an
untrusted device, even though the call may be secure.
10
Then...
Look for a security icon in the top right corner of the call
activity area, next to the call duration timer:
Authenticated call or conference
Encrypted call or conference
Non-secure call or conference
Listen for a secure indication tone at the beginning of the call:
• Secure call status—If the phone is protected, the "Play
Secure Indication Tone" is enabled, and the call status is
secure, a secure indication tone plays on the protected
phone at the beginning of a call (three long beeps with
pauses). The lock icon is also present to indicate that the
call is secure.
• Nonsecure call status—If the phone is protected, the "Play
Secure Indication Tone" is enabled, and the call status is
nonsecure, a nonsecure indication tone plays on the
protected phone at the beginning of a call (six short beeps
with brief pauses). The play arrow icon is also present to
indicate that the call is not secure.
For more information, see your system administrator.
See your system administrator.
OL-22333-01