Cisco 7962G User Manual page 15

1
Set the handset aside and pull the square plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
3
Return the handset to the handset rest.
Adjusting the Footstand (Optional)
To change the angle of the phone base, adjust the footstand while pressing the footstand button.
Registering with TAPS
After your phone is connected to the network, your system administrator may ask you to auto-register
your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS may be used for a new
phone or to replace an existing phone.
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system
administrator, and follow the voice prompts. You may need to enter your entire extension, including
the area code. After your phone displays a confirmation message, hang up. The phone will re-start.
Using a Headset
You can use a wired headset with your Cisco Unified IP Phone. If you use a Cisco Unified IP Phone
7962G or 7942G, you can use a wireless headset in conjunction with the wireless headset remote
hookswitch control feature.
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
2 3
Connecting Your Phone
3