Cisco 7962G User Manual page 31

If you want to...
Use CallBack to receive
notification when a busy
or ringing extension is
available
See if a line associated with
a speed-dial, call record, or
directory listing is busy
before placing a call to
that line
Make a priority
(precedence) call
(SCCP phones only)
Dial from a Personal
Address Book (PAB) entry
Place a call using a
billing or tracking code
(SCCP phones only)
Place a call using your
Cisco Extension Mobility
profile
Make a call from a
mobile phone using
Mobile Voice Access
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Then...
1. Press CallBack while listening to the
busy tone or ring sound.
2. Hang up. Your phone alerts you when
the line is free.
3. Place the call again.
Note When a call is being chaperoned, a call
chaperone cannot use CallBack.
Look for Busy Lamp Field indicators.
Enter the MLPP access number and then
enter the phone number.
1. Choose > Personal Directory to
log in.
2. Choose Personal Address Book and
search for a listing.
1. Dial a number.
2. After the tone, enter a client matter code
(CMC) or a forced authorization code
(FAC).
Log in to the Cisco Extension Mobility
service on a phone.
1. Obtain your Mobile Voice Access
number and end-user PIN from your
system administrator.
2. Dial your assigned Mobile Voice access
number.
3. Enter your mobile phone number
(if requested) and PIN.
4. Press 1 to make a call to an enterprise
IP phone.
5. Dial a desktop phone number other
than your desktop phone number.
Basic Call Handling
For more information,
see...
Your system
administrator
Using BLF to Determine a
Line State, page 7
Prioritizing Critical Calls,
page 11
Using Personal Directory
on Your Phone, page 4
Your system
administrator
Using Cisco Extension
Mobility, page 13
Managing Business Calls
Using a Single Phone
Number, page 14.
3