Pnp/ Pci Setup Defaults - Intel ECB-862 Series User Manual

Intel pentium ii full-size picmg cpu card with 4 usb 2.0, audio, & dual 10/100 base-tx ethernet

Table of Contents

User's Manual

4.5.7

PnP/ PCI Setup Defaults

This section describes configuring the PCI bus system. PCI (Peripheral Component

Interconnect) is a system that allows I/O devices to operate at speeds nearing CPU's

when they communicate with own special components.

All of options described in this section are important and technical and it is strongly

recommended that only experienced users could make any changes to the default settings.

4.5.7.1

PNP OS installed

This field allows you to use a Plug-and-Play (PnP) operating system.

Please set it as "No " if the operating system has no PnP function or to avoid reassigning

the IRQs by the operating system.

The choice: Yes, No.

4.5.7.2

Reset Configuration Data

In case a conflict occurs after you assign the IRQs or after you configure your system, you

can enable this function to allow your system to automatically reset your configuration and

reassign the IRQs, DMAs, and I/O address.

The choice: Disable, Enable.

62 ECB-862/862L User's Manual

Table of Contents