Press A Key To Reboot; Press F1 To Disable Nmi, F2 To Reboot; Ram Parity Error - Checking For Segment; Should Be Empty But Eisa Board Found Please Run Eisa Configuration Utility - Intel ECB-862 Series User Manual

Intel pentium ii full-size picmg cpu card with 4 usb 2.0, audio, & dual 10/100 base-tx ethernet

Table of Contents

User's Manual

Press A Key To Reboot

This will be displayed at the bottom screen when an error occurs that requires you to

reboot. Press any key and the system will reboot.

When BIOS detects a Non-maskable Interrupt condition during boot, this will allow you to

disable the NMI and continue to boot, or you can reboot the system with the NMI enabled.

RAM Parity Error – Checking For Segment...

Indicates a parity error in Random Access Memory.

Should Be Empty But EISA Board Found

Please Run EISA Configuration Utility

A valid board ID was found in a slot that was configured as having no board ID.

NOTE; When this error appears, the system will boot in ISA mode, which allows you to run the EISA

Configuration Utility.

Should Have EISA Board But Not Found

Please Run EISA Configuration Utility

The board installed is not responding to the ID request, or no board ID has been found in

the indicated slot.

NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA

Configuration Utility.

Indicates that a slot designated as empty by the EISA Configuration Utility actually

contains a board.

NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA

Configuration Utility.

Indicates the present boot attempt has been aborted and the system must be rebooted.

Press and hold down the CTRL and ALT keys and press DEL.

96 ECB-862/862L User's Manual

Table of Contents