4.5.5.13
IR Transmission Delay
If this option is enabled, transmission of data will be slower. This is recommended when
you encounter transmission problem with your device.
The choice: Disable, Enable.
4.5.5.14
UR2 Duplex Mode
Select to activate the Infrared transfer function. This default setting is "Half".
The choice: Full, Half.
4.5.5.15
Use IR Pin
When you select to IrDA or ASKIR mode, you can define use (TX,RX ) pin.
The choice: RxD2, TxD2; IR-Rx2Tx2.
4.5.5.16
Onboard Parallel Port
Select address and interrupt for the Parallel port.
The choice: Disable, 378/IRQ7, 278/IRQ5, and 3CB/IRQ7.
4.5.5.17
Parallel Port Mode
Select an operating mode for the parallel port.
The choice: SPP, EPP, ECP, ECP+EPP, and Normal.
4.5.5.18
EPP Mode Select
Set parallel port as EPP1.7 or EPP1.9.
The choice: EPP1.7, EPP1.9.
4.5.5.19
ECP Mode Use DMA
Select a DMA channel if parallel port is set as ECP or ECP+EPP.
The choice: 1, 3.
ECB-862/862L User's Manual 57
ECB-862/862L