User's Manual
3.7.2
Jumper & Connector List
Connectors on the board are linked to external devices such as hard disk drives, keyboard,
mouse, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
The following tables list the function of each of the board's jumpers and connectors.
Jumpers
Label
CN10
J1, J2
J3
J4
J5
J6
J7
J8
18 ECB-862/862L User's Manual
Function
External speaker select
COM2 RS-232/422/485 select
Clear CMOS
Reserve for internal test only
Compact Flash mode select
Reserve for internal test only
Reserve for internal test only
M-Systems DiskOnChip memory
address select
Note
4 x 1 header, pitch 2.54mm
4 x 3 header, pitch 2.0mm (J2)
3 x 2 header, pitch 2.0mm
3 x 1 header, pitch 2.54mm
3 x 1 header, pitch 2.54mm
2 x 1 header, pitch 2.54mm
3 x 1 header, pitch 2.54mm
3 x 1 header, pitch 2.54mm
2 x 2 header, pitch 2.54mm