Table of Contents
Advertisement
2
Operation and Features
Power Up
20
Take note of the following when you power up the U2751A.
• The U2751A can only be operated via the USB interface.
• Before you can control the U2751A, you need to install
the hardware driver and the IO Libraries Suite 14.2 or
higher. Both of these are included when you purchase the
U2751A. Refer to the Agilent USB Modular Products and
Systems Quick Start Guide for the installation procedure.
• On the front panel of the U2751A, there are two LED
indicators. Refer to
page 3.
• Power indicator lights up once the U2751A is powered up.
• USB indicator will only blink when there is data exchange
activity between the U2751A and the PC.
Chapter
1,
"Product Outlook"
U2751A User's and Service Guide
on
Advertisement
Table of Contents
