U2751A User's and Service Guide
SCPI Commands
The following examples show the SCPI commands for
executing the closing and opening of the relays.
Example 1, Make contact at channel 302
-> *CLS; *RST
-> ROUTe:CLOSe (@302) // Closes the relay at row 3,
Example 2, Break contact at channel 302
-> ROUTe:OPEN (@302)
Example 3, Make contact at channel 101, 302
-> ROUTe:CLOSe (@101,302) // Closes relays at row
Operation and Features
// Resets the switch to the
default power-on state.
This command can be
ignored if this operation is
not required.
column 2.
// Opens the relay at row 3,
column 2.
1, column 1 and row
3, column 2.
2
23