Table of Contents
Advertisement
3
Set Up Your System
How to power your E6473B hub
28
Do this
7 Select the drivers that were added to your PC
when you installed the E6474A software.
These can be found in:
C:\Program Files\Agilent Technologies\
Shared\Drivers\Edgeport\E6473B
8 Accept all the installation options listed by the
installation wizard.
9 The installation process is repeated for each
added port.
10 Restart your PC.
The E6473B hub can be powered from any of these sources.
Powering the E6473B hub
Power from the in-vehicle lighter socket using the in-vehicle
lighter cable (E6473-90004) (option 015).
Power from the in-vehicle chassis (E6473-60224) connected
directly to the vehicle ignition system (option 021).
Power from a battery (E6473-60008) connection using the
in-building chassis (E6473-60225) (option 022).
Power the E6473B hub from the in-vehicle lighter socket
The E6473B hub (option 015) is supplied with a lighter power
cable. The E6473B hub is connected directly to the in-vehicle
lighter socket. Refer to
Notes
Do not use any other drivers.
Select 'yes' for any digital
signature dialogs.
Figure 3
on page 29.
Agilent E6474A User's Guide
Refer to
page 28
page 29
page 30
Advertisement
Table of Contents
