Date And Time; Viewing The Current Date And Time; Setting The Date And Time - Honeywell ADEMCO VISTA-10P User Manual

Viewing the Current Date and Time

Viewing the Current Date and Time
Viewing the Current Date and Time Viewing the Current Date and Time
The master user can view the system time and date setting on alpha keypad. Other
users can view the date/time if a function key has been programmed to do so.
(Master Code)
OR, press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
A typical time/date display is shown.
The display will remain on for about 30 seconds or
until a key is pressed.

Setting the Date and Time

Setting the Date and Time Setting the Date and Time Setting the Date and Time
You can set the time and date by doing the following:
1.
(Master Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [
To go back, press [#].
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [2] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit,
or wait 30 seconds.
+[#] + [6] [3]
"A " " B " "C "
If one of the above keys has been programmed for the date/time
display feature, place a check mark in the box beneath that key.
+[#] + [6] [3]
∗
].

Date and Time

Date and Time
Date and Time Date and Time
Alpha Display:
DISARMED
READY TO ARM
TIME/DATE
12:05AM_05/09/00
"D "
Alpha Display:
DISARMED
READY TO ARM
TIME/DATE
04:04PM 10/17/00
Current time display
TIME/DATE
04:04P2000/10/17
Time/date editing display
SAT
SAT
SAT
– 23 –