At!Just The Exhaust Adaptor; Connecting Ductwork - GE SCB1000 Installation Instructions Manual

Installation Instructions
IA4-1 MOUNT THE OVEN (cont.)
If your cabinet fl'ont hangs more than 2'_A " below tile
cabinet bottom, you may need to use longer screws than
tile ones provided with this product. Tile screws pro\ided
with this product (hardware item 3) are self:aligning,
lmge-head machine screws 1/4" diameter; 3¼" long,
with SAE 28 threads per inch. It is important that )_)u
use replacement screws just long enough to attach the
product to tile cabinet. Tile length can be detemfined
by measm_ing tile height of tile overhang fl'om tile top
ot tile cabinet floor to tile bottom of tile overhang and
adding 1" to that length. This will be the length of the
1/4" SAE 28 threads per inch screws w)u need.
You will also need to tlse washe_ 3/4" diameter to fit tile
screws you pro'chase. This will prevent the screw heads
fl'om pulling through tile bottom of tile cabinet when
tightening dm_ing installation.
CabinetFront
CabinetBottomShelf
FillerBlock
-Eq uivalent
to Depth
of Cabinet
Recess
gningScrew
OvenTop
_] Attach tile oxen to tile top cabinet.
_] Insert 2 self:alignim* screws throtu*h outer top cabinet
holes. Turn two flfll turns on each screw.
_] Tighten center
screw completely:,
_] Tighten tile outer 2 screws to tile to I) of tile oxen.
(X4q/ile tightening screws, hold the oxen in place
against tile wall and tile top cabinet.)
[]
[]
Install grease filte_5.
See tile Owner's Manual
packed with the oven.
Remove tile tape fl'om tile
cooktop lan/p covei3 on
tile bottolil
of tile oven.
Secm'e tile power cord to tile cabinet wall, as desired
to kee I) excess length out of the way using the power
cord strap and the black metal screw.
ADJUST THE EXHAUST
ADAPTOR
Open tile top cabinet and a(!iust tile exhaust adaptor to
connect to tile house duct.
For top exhaust on tile fiat-bottomed cabinets, open tile
top cabinet and attach tile exhaust adaptor to tile oven
through tile cabinet bottom with tile 2 bronze metal
screws provided.
Damper '_
I-A- CONNECTING DUCTWORK
HouseDuct
-1
_ Extend tile house duct down to connect to tile
exhaust adaptm;
t_aV_Seal exhaust duct ioints using duct ta
• , I)e ,
14