Mount The Oven; Adjust The Exhaust Adaptor; Connecting Ductwork - GE PVM1790 Installation Instructions Manual

Installation Instructions
I--_I MOUNT THE OVEN (continued)
[_ Attach the oven to the top cabinet.
[_ Insert 3 self-aligning screws
(_"-28 x 2 s_,,)through outer
top cabinet holes. Turn two full
turns on each screw.
CabinetFront
CabinetBottomShelf
FillerBlock
, This distance
-_quivalent can NOT
I to Depthof | exceed2" to
_ CabinetRecess_ ensurepr°per
, installation
-- Self-AligningScrew
OvenTop
[] Tighten the outer two screws to the top of the oven.
(While tightening screws, hold the oven in place
against the wall and the top cabinet.)
,/
[_ Install grease filters. See the Owner's IVlanual
packed with the oven.
I-_ ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
i
Backof
Oven
I-_ CONNECTING DUCTWORK
HouseDuct
[_ Extend the house duct down to connect to
the exhaust adaptor.
[_ Seal exhaust duct joints using duct tape.
14