Migning The Wall Plate - GE SCB1000 Installation Instructions Manual

Installation Instructions
i--_ ALIGNING THE WALL PLATE
I/
HoleA-[
Hole C/
CAUTION:
on shaq) edges.
_j_ Draw a xertical line on the wall at the center of the
50" wide space.
_]Use the mounting plate as the template for the rear
wall. Place tile mo/mfing plate on tile wall, making sm'e
that tile tabs are touching the bottom of the cabinet or
the level line dxawn in Step C for cabinets with front
overhm_g. Line up the notch and center line on the
momlthag plate to the center line on the wall,
[] _qfile holding tile molmfing plate with one hand,
draw circles on the wall at holes A, B, C and D (see
illustration above/actual plate marked with arro_vs).
Four holes must he used for mom_thlg,
[]
NOTE: Holes C and D are inside area E. If neither
C nor D is ill a stud, find a stud SOlnewhere ill area E
and draw a fifth drcle to line up with tile stud. It is
important to use at least one wood screw motmted
firmly in a stud to support tile weight of tile oxen.
Set the mom_thag plate aside.
Drill holes on the circles. If there is a stud, drill a :_A(_"
hole for wood screws. For holes that don't line up with
a stud, drill a %" hole fin" toggle bolts.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
10