Outside Back Exhaust; Back Exhaust - GE SCB1000 Installation Instructions Manual

Installation Instructions
OUTSIDE BACK EXHAUST
(Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare
Rear Wall
B2. Attach Mounting Plate to XMfll
B3. Prepare Top Cabinet
B4. A(!iust Blower
B5. Mount tile Oven
[-B-_ PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
[]Place tile mounting plate against tile rear wall and
align it with the holes drilled earlier:
_] Using a pencil, put dots through slots F and G, and
through holes H and I. Remove tile mortaring plate
and draw lines extending through the p()ints. This will
give the lcoadon and size ot the box cutout ti)i" the
rear wall duct.
_] Attach tile exhaust adaptor to tile rear mortaring plate
b) sliding it into the gukles at the top center of the
plate on the wall side,
Exhaust Add ptor _.........__-,_ Damper
(hingeside up)
/_.,_/_/.._ _ Mounting Plate
Slide Exhaust (o _t.__...,_ (wall side)
AdaptorInto [___
Guideson _ ...._( _:_
e0rPane,
U ';_P-_ Locki' /
_° Tabs Guides
Push in secm'ely tmtil it is past tile top locking tabs and
in the lower locking tabs. Take care to assm'e the damper
hinge is installed so that it is at tile top and that tile
damper swings fl'eely.
[] (_arefully guide tile exhaust adaptm, now drenched to
the motmting plato, into the house duct, l)etk)i'e using
tile screws to attach tile plate to tile wall.
15