Detemfining Wall Plate I,Ocation - GE SCB1000 Installation Instructions Manual

Installation Instructions
_--] DETERIVIINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate positionmbeneath flat bottom
cabinet
Plate positionmbeneath framed recessed
cabinet bottom
Bottom
PlateTabs
i the Cabinet
Mounting Plate Tabs
the Back
Frame
At least 30", up to 36"
30" to
Cooktop
Plate position_beneath recessed bottom
cabinet with front overhang
Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
II
II
II 30"to
Cooktop
_4mr cabinets may have decorative trim that intetteres
with the oven installation. Remove the decorative trim
to install the oven properly and to make it level.
TI_ OVEN MUST BE LEYEL
Use a level to make
sm'e the cabinet bottom is level.
If the cabinets have a fl'ont overhang onl); with no back
or side fl'ame, install the motmting plate down the same
distance as the fl'ont overhang depth. This will kee I) the
oven level.
[_ Measm'e the inside depth of the fl'ont overhang.
[] Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the fl'ont overhang.
_]For this bpe of installation with front oxerhang
only; align the mortaring tabs with this horizontal
line, not touching the cabinet bottom as described
in Step D,
9