Kenmore 911.36665 Owner's Manual page 28

BEFORECALLING FORSERVICE
To save you time and money, before making a ser,,ice call check the list below for any
problem you may feet you have with the performance of your range If the problem is
something you cannot fix use the Consumer Service Numbers located at the back of this
manual When making any calls have the Model No,_ Repair Parts list,
Use and Care Manual and the Date of Purchase available.
PROBLEM POSSIBLE CAUSE
The display of your
control is flashing
OF" followed by a
number or letter,
Range malfunction
POSSIBLE SOLUTION
Press the CLEAR/OFF
pad,, Let the oven cool for
t hour and enter an oven
or cleaning operation If
code repeats, call for
service
Oven and oven
control will not
work.
No power to range
....... lUJiJJll,,i i,ill
Oven temperature Thermostat calibration
seems inaccurate.
Oven will not Clean cycle is not
unlock, finished,
Check the c#cuit breaker
or fuse Make sure the
power cord is plugged in
See the adjustments
described following this
section
Oven temperature must
drop below the lock
temperature before the
door will unIock,
Oven light will not a. Light switch in off a. Check oven light
work. position, switch on the control
panel.
b, Oven light bulb h, Check the oven light
burned out. bulb
Oven did not
clean or results
were poor,
a, Controls were not set
properly.
b, Clean cycle was
interrupted
c. Oven was soiled
heavily.
a. Check the self-cleaning
section of this manual.
b, The normal clean cycle
should last 4 hours.
c, Heaw spiltovers
should be removed
before the cycle is set
You can also repeat
the cycle
28
229C4020Pt66 1,t2 SiZE 28
!0/t/97, 3:19 PM