Kenmore 911.36665 Owner's Manual page 19

OPERATION
Self.Cleaning Cycle
The Clean Cycle, including cool down
time, is automatically set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled up to 5 hours if
oven is heavily soiled
t, Latch the door handle
Q
00
Q
2w
3_
Press the CLEAN
pad 4 hours will show
in the display
If you want to change
the length of clean time
press the UP and/or
DOWN arrow pad
4, Press the START
pad
Simply press the CLEAR/OFF pad
You will need to wait for the oven
temperature to drop below the lock
temperature (approx 1 hour) before
attempting to open the door
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp clolh or sponge,
If white spots remain, scrub them
with a soap-filled steel wool pad Be
sure to rinse thoroughly These are
usually deposits of salt that cannot
be removed during the cycle
If for any reason you are not
satisfied with the cleaning
results_ just repeat the cycle.
1, Latch the door handle
2. Press the CLEAN pad
3m
If you want to change
the length of clean time
press the UP and/or
DOWN arrow pads
Press the DELAY
START TIME pad
Press the UP or
DOWN arrow pads to
set the time you prefer
the clean cycle to start
6, Press the START pad
t9
229C4020P166 l/2 S_ZE 19 9125,.'97 1:16 PM