Kenmore 911.36665 Owner's Manual page 26

CARE ANDCLEANING
RemovableParts
TO REMOVE
Be sure that all controls are turned off
and that the unit is coo]. Lift off burner
grate, burner cap and burner head
Do not remove burner bowl.
_ _URN_R GRATE
TO REPLACE
t. Place the burne_ head onto the burner
bowl making sure the location of the
spark igniter matches up with the
opening in the burner head.
2, Place the burner cap on the burner
head,
3. Place the grate over the burner
assembly and onto the burner bowl
The indentations of the bow] should
match the location pins on the bottom
of the grates
,,_:,-_ BURNER HF.AO
MIXER TUg E
............ The,,e,l,e,ctrode,,,,of,t h e, ,,,_
_ park igniter is ex- posed beyond the top
of the burner. When
cleaning the burner bowl, be
careful not to snag the electrode
of the spark igniter with your
cleaning cloth, Damage to the ig-
niter could occur. Be careful not
to turn on any cooktop controls
while cleaning bumer bowls, A
slight electrical shock might re-
suit_ which could cause you to
_knock over hot cookware.
26
229C4020Pt66 t/2 S_ZE 26 9/|8/97 10;32 AM