Kenmore 911.36665 Owner's Manual page 21

OPERATION
SettingSpecial Features
Your control will allow you to lock the
touch pads so they cannot be
activated when pressed If you're
worried about leaving the oven
unsupervised, activate this feature
t. Press and hold, at the same
time, the BAKE and BROIL
pads for 3 seconds, until the
display shows SF
2. (a| Press the CLEAN pad, The
display shows LOC OFF (lockout
off).
(b) Press the CLEAN pad
again, The display will show
LOC ON (lockout on)
3. Press the START pad
This feature can only be set
when the oven is not in use.
When this feature is on, the display
will show LOC, if a touch pad is
pressed. (This feature will not affect
the Clock or Timer pads )
Your new control has a cook and
hold feature for timed cooking only
that will keep hot cooked foods warm
up to 3 hours after the timed cooking
is finished, To activate this feature:
1, Press and hold, at the same
time, the BAKE and BROIL
pads for 3 seconds, until the
display shows SF
2. (a} Press the OVEN COOKING
TIME pad The display will show
HLd OFF,
(b) Press the OVEN COOKING
TIME pad again to activate the
feature The display will show
HLd ONr
3. Press the START pad
This special feature will allow you to
change the speed; #1 means speed
of change is slow up to #5 which
means speed of change is fast To
set the speed you prefer, follow
these steps:
1. Press and hold, at the same
time, the BAKE and BROIL
pads for 3 seconds, until the
display shows SF,
2. Press the UP arrow pad. The
display wilt show the current set
speed
3. Press the UP arrow to increase
the speed up to the number 5.
or
Press the DOWN arrow pad to
decrease the speed down to the
number t.
4. Press the START pad
21
229C4020P'_66 1/"2 SIZE 2t 91t8/'97, 10:13 AM