Kenmore 911.36665 Owner's Manual page 24

CARE ANDCLEANING
Removable Parts
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Soft cloth
Mstch Flat
tn Stem
With
TO REMOVE
1. Be sure the control knob is in the
off position,
2. Pull straight off the stem
Using a piece of string can make
removing the knob easier, Slip the
string under and around the knob,
pulling straight out
TO CLEAN
Wash the knob thoroughly with soapy
water, Dry completely with a soft cloth
DO NOT let the knob soak,
TO REPLACE
1, Check tile back of the knob. The
molded flat of the knob is designed
to fit perfectly onto the knob stem
flat,
2. Align the molded flat to the flat on
the knob stem
3. Push the knob back as far as it will
go
r /_'_l\ CAUTION: Be sure
the oven light
switch is in the off
position, Do not
touch a hot light bulb with
wet hands or a wet cloth.
Wait until the bulb has
cooled and use a dw cloth.
Never touch the live collar ol
the bulb, If you are replacing
a broken light bulb make
sure the power supply is off.
h.- ,d
Gasket
Gas Retainer
Glass Cover \\
Screw
TO REPLACE
1. Remove the three screws and lift off
the glass retainer, glass cover and
gasket
2. Replace the bulb with a 40 watt appfi-
ance bulb An appliance bulb is
smaller than a standard 40 watt
household bulb
3. Replace the gasket, glass cover and
glass retainer Tighten screws se-
curely,
24
229C4020Pt66 1/2 SIZE 24 10/6/97 I, 1:'15 AM