Kenmore 911.36665 Owner's Manual page 4

IMPORTANT S AFETY
INSTRUCTIONS
Remove all part s from the plastic
bag attached to the back of the
range and save packaging tape.
Before placing range in the counter,
check the location of the stability
bracket on the back of the range,
Bracket
Location
1. Decide on
a location
that has
no
electrical
wiring or
plumbing
2. With the long screw provided,
31
anchor the
chain to the
floor or wall
Make sure the
screw is
going into the
wail plate or
Long Chain I J Wall
Screw Washe Plato
stud at the base of the wall at least
3/4"
4. Attach the stability chain so that it
lines up with the bracket on the back
of the range.
5. Tug the chain to make sure it is
securely fastened
6. Take the packaging tape and
temporarily attach the loose end of
the chain to the rear of the
countertop
7, Slide the range into
the counter leaving
enough space behind
to attach the chain to
the bracket
8. Slip the nearest link of
the chain onto the
bracket Pull to make sure it i_e
snug as possible.
9. Slide the range all the way back It is
normal to have some slack in the
chain, but it should not be excessive,
9C4020P_66 t/2 SiZE }016]97, t2:44 pM