Oki OKIFAX 2350 User Manual page 61

Hide thumbs Also See for OKIFAX 2350:
Table of Contents

Advertisement

your document. When turned off, your fax machine's
Sender ID will not be printed.
04 MONITOR VOLUME:
This function sets the volume
your fax machine uses for telephone line monitoring
sounds after dialling. Available settings are low, high
and off.
05 REMOTE DIAG.:
The remote diagnostics feature
allows a service person to remotely dial and service
your fax machine. Available settings are on and off.
06 CLOSED NETWORK:
This function allows you to
program your fax machine to refuse to receive faxes
from or transmit faxes to locations whose telephone
numbers have not been programmed into your fax
machine's One Touch keys or Auto Dial numbers.
Using this function, you can set up a closed network
of fax machines. If you do not want your fax machine
to transmit faxes to or receive faxes from locations
outside your network, select T/R. If you only want
your fax machine to refuse to receive faxes from
outside your network, select RX. Available settings are
OFF, T/R and RX.
This function allows you to
07 TX MODE DEFAULT:
change your fax machine's default type of original and
transmit resolution settings. Unless you select
otherwise using the Transmit Resolution/Yes
Type of Original/No
keys, your fax machine is set to
use the STD and NORMAL settings. If you are
constantly sending faxes which require some other
combination of transmission modes, use this function
setting to change the default transmission modes to
any other combination of settings. While you are
programming, the new default combinations will
appear on the LEDs above the Transmit Resolution/
Yes
or Type of Original/No
08 T/F TIMER PROG.:
answering mode, your fax machine automatically
distinguishes between incoming voice and fax calls. If
the incoming call is a voice call, your fax machine will
ring to tell you to pick up the handset. If you do not
answer, your fax machine automatically switches back
to facsimile mode to allow the calling party to send a
fax. The T/F TIMER function controls how long your
fax machine waits before switching back to fax mode.
Available settings are 20 seconds or 35 seconds.
09 BUZZER VOLUME:
of the various beep and alarm tones your fax machine
emits during operations. Available settings are low,
middle and high.
10 1'ST PAPER SIZE:
your fax machine what size of paper you are using in
your fax machine's built-in paper cassette. Available
or
settings are A4, letter, or legal.
keys.
When set to the telephone/fax
This function sets the volume
This function allows you to tell
61
Programming

Advertisement

Table of Contents
loading

This manual is also suitable for:

Okifax 1050Okifax 2450

Table of Contents