Table of Contents
Advertisement
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
3
On the numeric keypad, press 2. The display will show
2:DIAL PARAMETER.
4
Press the Yes
key until the display shows PBX LINE,
[OFF].
5
Press the No
key. The display will change to
PBX LINE, [ON].
6
Press the Yes
key until the display shows
ACCESS DIGIT, [OFF].
7
Press the No
key. The display will change to
ACCESS DIGIT, [ ] ENTER 4DIGITS.
8
Using the numeric keypad, enter the number you
normally dial from your PBX to obtain an outside line.
9
Press the Space One Touch key until the display
changes.
10 Press the Yes
key. The display will show
2:DIAL PARAMETER.
11 Press the Select Function key to finish.
Keep in mind that all of the outside telephone
Tip:
numbers you program into your fax machine will have
to begin with your PBX's access digits.
34
Installation
To later turn off the PBX LINE and ACCESS DIGIT
Tip:
functions, follow Steps 1–7 above. At Step 8, press the
Space key four times.
Advertisement
Table of Contents
