Table of Contents
Advertisement
dialling. You will be able to hear the dialling through
your fax machine's speaker.
If you have an optional telephone handset or external
telephone connected to your fax machine, you can
also use this key to initiate or answer a request for
voice communication. During a fax communication,
press the Hook/Voice Request key to tell the operator
at the other fax machine that you want to talk to him
or her at the end of your transmission or after
reception of any page has been completed. To answer
a voice request, press the Hook/Voice Request key
after lifting your telephone handset.
10 One Touch Keypad:
For a description of all the
functions of the One Touch keypad, see the next
section, The One Touch Keypad.
11 One Touch Labels:
After programming a location
into a One Touch key, write the location's name on the
One Touch label. Lift off the plastic cover above the
One Touch label, use a pencil to write in the name,
then replace the cover.
When dialling, these 12 keys
12 Numeric Keypad:
work just like the keypad on a telephone. You will also
use the keypad to enter numbers, letters and other
characters while programming.
16
Component Identification
If your fax machine is set to pulse
13 */Tone Key:
dialling, this key allows you to switch the dialling
operation of your fax machine from pulse to tone
dialling during your current call. You can also use this
key while programming to create numbers with mixed
pulse-then-tone operation.
14 0/Unique Key:
When dialling, you will use this
key to enter a "0". When programming your Sender ID
or a Location ID, you can use this key to enter a variety
of unique characters, including: ! # & ' ( ) * + , – . / : ;
= ? · ä ß ñ ö ü Æ Å Ø æ å ø.
15 Transmit Resolution/YES
change the resolution used for transmitting documents.
Use STD for standard originals, FINE and EX.FINE for
detailed or small print originals, and PHOTO for
originals that include colours or many shades of grey.
You will also use this key as the Yes
making selections or to move your cursor while
programming.
16 Type of Original/NO
key:
the document contrast after you load a document for
transmission. Use LIGHT for originals that are too light,
NORMAL for documents with good contrast, and
DARK for originals that are too dark.
key:
Use this key to
key when
Use this key to select
Advertisement
Table of Contents
