Table of Contents
Advertisement
5
After the display clears, enter the main fax number.
Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens
Enter pauses (i.e., to wait for
long distance or outside lines)
Add a switch from pulse to tone
dialling for part of the call
Move the cursor to make
corrections
6
Press the Start key.
7
Enter the Location ID. This is a descriptive title up to
16 characters long. Refer to the instructions below.
To Do This
Use
Enter numbers
Numeric keypad (press once)
Enter spaces
Space One Touch key
Enter hyphens
Hyphen key
Enter alphabet
Locate the character you want on
characters
the numeric keypad. Press that
key repeatedly until the character
appears.
36
Dial Directories
Use
Numeric keypad
Space One Touch key
Hyphen key
Pause key
*/Tone key
8
Yes
and NO
keys
9
10 Press the Start key to finish programming the One
11 To continue programming One Touch keys, go back to
12 Lift off the plastic cover above the One Touch label.
To Do This
Use
Enter a unique
Press the 0/Unique key repeatedly
character
until the character you want
appears. The following characters
are available:
/ : ; = ? · ä ß ñ ö ü Æ Å Ø æ
å ø
Enter two letters
Press the NO
using the same key
the next character
Move the cursor to
Yes
and NO
make corrections
Press the Start key. The display will show NO=<OR
LOCATION>.
Enter the alternate fax number. Refer to the
instructions following Step 5.
Touch key. The Display will show LOCATION
PROGRAMMING.
Step 3. If you are finished programming, press the
Select Function key.
Using a pencil, write in the name for your newly-
programmed One Touch key. Then replace the cover.
! # & ' ( ) * + , – .
key to move to
keys
Advertisement
Table of Contents
