Oki OKIFAX 2350 User Manual page 13

Hide thumbs Also See for OKIFAX 2350:
Table of Contents

Advertisement

Expansion Slot Cover
Open this cover to expose expansion
slots for optional PC interface and
memory expansion boards.
LINE Terminal
Terminal for connecting the unit to an
outside telephone line.
TEL 1 Terminal
TEL 2 Terminal
Terminals for connecting the unit to an
optional handset or external telephone.
LED Print Head
This black bar is the part of your fax
machine which writes received or
copied images onto the image drum
unit. You should clean this bar each time
you change your toner cartridge.
Toner Cartridge
This black cylinder, installed inside the
image drum unit, contains the black
powder which is your fax machine's ink.
You will need to install a new toner
cartridge when TONER LOW or
REPLACE TONER CART messages
appear on the display.
AC Power Inlet
Plug the AC power cord, supplied with
your unit, into this inlet.
Cable Run for Telephone Cord
When installing the optional external
handset, feed the telephone cord through
this cable run to the TEL 1 or TEL 2
terminals.
Image Drum Unit
The image drum unit contains the
green photosensitive drum which
receives images from the LED
print head and transfers them to
the printing paper. You will need
to change your fax machine's
image drum unit about once every
12,000 pages (depending on
usage).
Component Identification
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Okifax 1050Okifax 2450

Table of Contents