Oki OKIFAX 2350 User Manual page 38

4 Using the numeric keypad, enter a 2-digit number for
the Auto Dial number you want to program. Refer to
the table of Auto Dial numbers available.
Model Auto Dial Numbers Available
OKIFAX 1050 01–40
OKIFAX 2350 01–64
OKIFAX 2450 01–99
5 The display will briefly show NO=<FAX NO.>,
ID=<LOCATION ID> (or a previously-programmed fax
number and location).
6 After the display clears, enter the fax number. Refer to
the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens
Enter pauses (i.e., to wait for
long distance or outside lines)
Add a switch to from pulse to
tone dialling for part of the call
Move the cursor to make
corrections
7 Press the Start key.
38
Dial Directories
8
Use
Numeric keypad
Space One Touch key
Hyphen key
9
Pause key
*/Tone key
10 To continue programming Auto Dial numbers, go back
Yes and NO keys
Enter the Location ID. This is a descriptive title up to
16 characters long. Refer to the instructions below.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces Space One Touch key
Enter hyphens Hyphen key
Enter alphabet Locate the character you want on
characters the numeric keypad. Press that
key repeatedly until the character
appears.
Enter a unique Press the 0/Unique key repeatedly
character until the character you want
appears. The following characters
are available:
/ : ; = ? · ä ß ñ ö ü Æ Å Ø æ
å ø
Enter two letters Press the NO
using the same key the next character
Move the cursor to Yes and NO
make corrections
Press the Start key to finish programming the Auto Dial
number. The display will show AUTO DIAL NO.
to Step 4. If you are finished programming, press the
Select Function key.
! # & ' ( ) * + , – .
key to move to
keys