Replacing The Hard Drive In The Hard Drive Kit - Gateway M675 Service Manual

Replacing the hard drive in the hard drive
kit
Tools you need to complete this task:
Screws removed during this task:
4 chrome 3 × 3.5 mm
(hard drive kit)
To replace the hard drive in the hard drive kit:
1
Follow the instructions under
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in
page 7.
5
Remove the hard drive kit by following the instructions in
kit" on page
12
Phillips #0 screwdriver
"Preventing static electricity discharge" on page
9.
www.gateway.com
"Preparing the notebook" on page
"Removing the battery" on
"Replacing the hard drive
5.
6.