Replacing The Keyboard - Gateway M675 Service Manual

Replacing the keyboard

Tools you need to complete this task:
Screws removed during this task:
5 chrome 2.5 × 2.5 mm
(keyboard)
To replace the keyboard:
1
Follow the instructions under
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in
page 7.
5
Turn the notebook over so the top is facing up.
6
Open the LCD panel to the fully open position.
Caution
7
Remove the keyboard cover by following the instructions in
cover" on page
18
Phillips #0 screwdriver
Flat-blade driver
"Preventing static electricity discharge" on page
Be careful not to use too much force when opening the LCD panel.
16.
www.gateway.com
"Preparing the notebook" on page
"Removing the battery" on
"Replacing the keyboard
5.
6.